Autoblogger Pro, Content Theft Or Innovation?
First of all, there may be some of you that have never even heard of Autoblogger Pro. So let?s examine this new script. Autoblogger Pro is really a very simple concept. It integrates itself into a Wordpress blog and then uses RSS feeds from news sources and blogs to populate the blog with relevant content. For example, if you want to build a blog that focuses on ?Mortgages? then you would simply locate several blog or news feeds that focus on mortgages and then load them into the admin area of the script. Every time the script is executed it will then pull in the RSS feed from all of the sites you?ve entered, and post them to the blog. In essence, you end up with a blog that contains highly targeted content, blended and unique because it comes from a variety of sources. All maintained by you with the click of a button! (A sample ABP blog can be seen here: http://www.dogs.pn ) Let me say this now. I am an advocate of Autoblogger Pro and I think that it?s a fantastic and logical development of the expected use of RSS feeds. It?s evolution people, and I think it?s fantastic! But this morning I was surfing the web and I happened to do a search for Autoblogger Pro to see what other people were saying. To my shock and dismay I found many sites screaming that Autoblogger Pro users are ?content thieves? , ?content RAPISTS?, ?Scam artists? etc. I found this very disturbing, so I researched a few of their websites to see if their content was in some way being actually stolen. To be honest, I really had to laugh when I looked at most of their sites. Prominently displayed on all of them were buttons for their various RSS feeds, asking for syndication! What exactly did you expect when you put that feed on your site? RSS is defined as Really Simple Syndication. So aren?t you asking that your content be syndicated when you put the feed link on your website??? Of course you are. Either they are too uneducated to understand what RSS is and put it on their sites without knowing what it is, or they are just ignorant or na and believe that only a few people with news readers will use the feed. There?s a very simple solution for this if you?re one of those people crying foul. TAKE THE FEED DOWN. If you don?t want your content syndicated, don?t put up a feed! Now there are some responsibilities that must be held by users of Autoblogger Pro, it?s a very powerful script, and there are options to use it unethically. When syndicating someone?s content you need to give CREDIT to the source. Remember writing term papers in college or high school? You always have to give credit to your sources. Autoblogger Pro gives you the option in it?s configuration to give credit and a link back to every post you get from syndication. USE THIS FEATURE. It?s only right to give credit where credit is due. If this is done properly, all of those blogs you?re getting your content from will stay happy, because they are in turn getting quality links back to their site, from another relevant site, and that in turn helps them in their search engine standings. It may even send them some traffic if your Autoblogger Pro site has some. Like it or not, syndication of content is what RSS was designed for. If you don?t like how your content is being syndicated, don?t put up a feed. But if you see the positives for content syndication you?ll understand that Autoblogger Pro sites will enhance your site, not detract from it. In the long run you?ll be glad to see your content in tons of places on the web! Till next time, Chuck Crawford Chuck Crawford is an established expert in web design, traffic development and website financial analysis. He has been helping people design and develop their internet business since 1996. This article may be reprinted freely as long as all links remain active. <a href="http://www.affiliatewebsitedesign.com">www.affiliatewebsitedesign.com</a> <A HREF="http://www.magicanswers.com">www.magicanswers.com</A> <A HREF="http://www.thegiftedone.com">www.thegiftedone.com</A>
Source: www.ArticlePros.com

Let Your Drawing Respond Faster in ZWCAD
Processing speed of CAD software is one of the most concerned issues of every user. Fast speed can be achieved directly by either software or hardware upgrade. In case of ordinary PC configuration, how can we further raise the speed even without software update? Here are some tips: 1. If you frequently specify the color or linetype for certain entities instead of using Bylayer or Byblock features, data will increase dramatically in the drawing, and it will take more time to process these data. It is suggested to create adequate and appropriate layers to which entities of different meanings or properties can be assigned respectively, so that the option of Bylayer and Byblock can help to reduce the amount of data stored. 2. If there are lots of layers in a drawing, some of which contain complicated entities seldom used, then you can freeze these layers, so that they would not regenerate with other layers, and result in processing time saving. 3. Hatch (Fill) is a kind of entity occupying much RAM. Too much hatches would significantly drag down the processing speed. To maintain high speed: (1) Do the hatching at the last step, so that there are no hatches affecting the speed during previous drafting steps. (2) Assign all hatches to a single or some specific layers and freeze some or all of them if possible. Then they will not regenerate with other entities. (3) In the Config dialogue box, select the Display tab and check the option Not display hatch while zooming. Entities such as Solid, Donut and Trace have another kind of fill. They can be displayed faster by setting OFF for FILLMODE. 4. Text also has influence on the speed of ZOOM, REDRAW and REGEN. Simplifying the display mode of text could help to increase the speed to a large extent. (1) Use a simple text font during the preliminary drafting work, and then replace this font with desired ones at the final stage when there are no more modifications to other graphic entities. (2) Use QTEXT to enable quick display of text. After the command is activated, boundary frames of text areas are displayed instead of text themselves. 5. In the case that we have to insert raster images: (1) Go to the Config dialogue box, select the Display tab and check the option Pan and zoom with raster & OLE, if it is not necessary to view raster images while doing PAN and ZOOM. (2) Use the command IMAGEQUALITY to choose a low quality display mode, when we don’t need to view images with high quality. 6. When REGENMODE is set as ON, ZWCAD will regenerate graphics automatically after executing some commands. Turning the mode off can help to save the time spent on automatic regeneration of graphics. 7. Entities often turn into dash line type for the purpose of highlighting when they are selected for modification. Sometimes such highlights take lots of time to display. So you can think of closing HIGHLIGHT if necessary. Not all methods might suit each specific case, but they do help if applied properly. When you get familiar with these features, drafting work could never be a difficulty in terms of speed, and you may find it easy and convenient to use ZWCAD in any situations. About ZWCAD As the flagship product of ZWCAD Software Co., Ltd., ZWCAD is a powerful CAD solution, which is highly compatible with DWG format. ZWCAD meets the needs of broad-based target groups of 2D/3D design industry, including architecture, engineering, construction, mechanics, manufacturing and electronics industries. So far, it has fast become the leading brand in China’s CAD industry and now competes successfully in over 65 countries, with 100,000 users throughout the world. (C) Copyright 2008 ZWCAD Software Co., Ltd. All rights reserved.Owen Zi is author of article written on ZWCAD. He is Director of Overseas Department of ZWSOFT. For more information, please visit: <a href="http://www.zwcad.org">www.zwcad.org</a> or contact ZWCAD team at sales@zwcad.com.
Source: www.ArticlePros.com

How To Identify A Virus Infected E-mail Message?
It is often difficult to identify an infected e-mail message. The way modern viruses and mass mailing internet worms function, messages can seem to arrive from friends or colleagues. In reality most infected messages are being automatically sent by another infected machine who has no idea their machine even has a problem. Since the virus or worm pretend to be the owner of the infected computer it can be hard for you when you get unexpected email messages from them. Here are a few important things to watch for: 1) E-mail messages from people you don’t know (including and especially SPAM). These are usually the culprits that put a virus on your computer. 2) E-mail messages from friends or family that you were not expecting (especially if they contain attachments). It is possible that these may not be from people you know, but may actually be spam messages. 3) Attachments in an email with subject lines that seem inappropriate or strange, even if it’s from someone you know. For example, an email from your retired father who is on a beach in Mexio titled “Update on system report” is suspicious. 4) You should NEVER EVER launch an attachment that ends with an .exe, .pif, .com, .bat, or .scr extension until you have scanned it with up-to-date virus scanner. Even files ending with .doc, and .xls (word and excel documents) can carry macro viruses and should be scanned. It does not matter if you completely 100% trust the person it came from. SCAN IT. 5) Never open SPAM email. Spam email is too easy to copy and use to send a nasty virus. I’m not saying spammers send viruses, but virus senders/creators do use spam-like messages to send their viruses, Trojans, and internet worms around. 6) If you’re not 100% sure the email is legitimate, call the sender and ask before opening the attachment. If you’re sure you’ve received an e-mail message with a virus, you should delete the email WITHOUT opening the email or the attachment. If it is important, it can always be resent. 7) Email is becoming the #1 method for viruses, worms and Trojan horses to spread. Take extra special care with your email, and you will not only protect yourself, but prevent yourself from accidentally becoming a spreader of virus loaded email messages. The smartest thing to do is simply install a very affordable antivirus program (like Norton, McAfee, or PC-cillin) and set it to automatically scan all incoming and outgoing email messages and attachments. This way you protect your own computer, and make sure you don’t forward any infected messages to your friends and family. The most important thing you have to realize is that viruses cannot get on your computer by themselves. You do have to put them there by opening files that can contain the harmful viruses. They could wipe out your hard drive, which could be detrimental for you if you have important files stored there and for which you don’t have a back up disk. If you do get a virus on your computer, you don’t have to panic. If a virus is active in the memory, the anti-virus software may not be able to detect it. If you really want to make sure your computer doesn’t have a virus, turn it off and reboot it using a disk that you know doesn’t contain any virus such as your antivirus software’s recovery disk. Learn how to<a href="http://www.reprint-content.com/Article/Remove-Blackworm-Virus/1581">remove blackworm virus</a> and how to block trojan horses, spyware, computer viruses, in the future. Large choice of <a href="http://www.reprint-content.com/Category/Security/149">Computer Security Articles</a>
Source: www.ArticlePros.com